Power Source; Location Of Controls; Front; Remote Sensor - memorex MLT1912 Guia Del Usuario

To operate the unit using AC power, connect the AC adapter (included) to the DC 12V IN
jack (z) on the rear of the unit. Connect the AC cord to the adapter and connect the
other end to a wall outlet having 120V AC, 60Hz only.
NOTES:
• When you turn on the unit, the AC adapter will become warm or hot. This is normal
and it is suggested to put the AC adapter in a cool place.
• The AC plug supplied with the unit is polarized to help minimize the possibility of
electric shock. If the AC plug does not fit into a nonpolarized AC outlet, do not file or
cut the wide blade. It is the user's responsibility to have an electrician replace the
obsolete outlet.

FRONT

1. STANDBY Button–Press to turn the TV on; the
STANDBY indicator will turn off. Press again to turn
the TV off (Standby mode); the STANDBY indicator
will light red.
2. SOURCE Button–Press to select a source (AV, S-
VIDEO, YUV, PC, ATSC or TV [NTSC]).
3. MENU Button–Press to access the on-screen
menu.
4. CHANNEL/NAVIGATION Down Button–Press to
select a lower-numbered channel or navigate down
in the setting menu.
5. CHANNEL/NAVIGATION Up Button–Press to
select a higher-numbered channel or navigate up in
the setting menu

POWER SOURCE

LOCATION OF CONTROLS

8 9
12 1 2 3 4 5 6
10
6. VOLUME Down/Navigation Left Button–Press to
lower the volume or navigate left in the
setting menu.
7. VOLUME UP/Navigation Right Button–Press to
raise the volume or navigate right in the
setting menu.
8. Screen
9. Base Stand
10. STANDBY Indicator–Lights red when the unit is
Standby mode and is not lit when the unit is on.

11. REMOTE SENSOR

12. Carrying Handle (Rear of Unit)
5
AC Outlet
AC Plug
7
11