Computer Connection; Installing The Stand - memorex MLT1912 Guia Del Usuario

Follow the instructions below to connect a computer to your television/monitor. (CABLES NOT INCLUDED.)
Jack Panel is
shown on its side.
Top of panel is this
side.

COMPUTER CONNECTION

INSTALLING THE STAND

(A)
(C)
(C)
(C)
(C)
(C)
(B)
1. Turn off the TV and your computer (PC).
2. Connect the audio cable (not included)
3. Connect a VGA cable from the computer's
4. Turn on the TV and press the SOURCE
5. Turn on your computer and the computer
NOTES:
•
•
•
(C)
13
from the computer's AUDIO OUT jack to
the TV's VGA AUDIO IN jack.
VGA OUT jack to the TV's VGA IN jack.
button until PC appears on the TV screen.
screen will appear.
You must follow the above steps when you
connect between the computer and the
television for the first time; otherwise, the
computer screen may not appear.
Refer to the computer's owner's manual for
additional instructions.
Side panel is accessible by pressing in on
the tabs, then lift the side cover off. After
connections have been made, slide the
wires through the bottom opening of the
cover and replace cover.
Gently insert the bottom
leg (A) into the stand (B)
until the tabs (C) click
into place.