English - Bang & Olufsen Playmaker Manual Del Usuario

8
This guide contains information
about the daily use of your
Bang & Olufsen product. We
expect your retailer to deliver,
install and set up your product.
If you want to install Playmaker
yourself, this guide explains
how to set it up for use with
AirPlay®, DLNA®, line-in and
connected speakers. You can
set up Playmaker in a wireless
network using the Bang &
Olufsen Setup Utility App*
your computer or you can
connect Playmaker to a wired
network for immediate use.
You can also see how to connect
other sources to your Playmaker.
It is possible to set up and
synchronise multiple Playmakers
in your home. Contact your
Bang & Olufsen retailer for
more information.
You can find more information
about Playmaker in the Frequently
Asked Questions (FAQ) section on
www.bang-olufsen.com/faq.
*The Bang & Olufsen Setup Utility
1
App supports iOS devices only.
Scan the QR code on page 3 to
download the app.

English

How to get started
Before you connect any
equipment to your Playmaker,
remember to disconnect
Playmaker from the mains
supply.
You must remove the back cover
from Playmaker to access the
connection panel.
> Place Playmaker on a soft cloth
with the Bang & Olufsen logo
facing downwards.
> Remove the table stand
or (if already mounted).
1
> Press firmly on the snap hook
and lift off the back cover.
> Run cables through the enclosed
cable cover.*
2
> Run cables through the hole in
the back cover.
> Connect Ethernet (optional),
line-in (optional) and speakers
before connecting the mains
cord.
> Reattach the back cover on
Playmaker. Make sure to align
the pivot points at the edges
before closing the back cover.
> Fit the table stand into the two
holes at the bottom of the back
cover. Run the cables above the
table stand.
Press firmly on the snap hook to
remove the back cover.
Make sure to align the pivot points
at the edges before closing the
back cover.
*If you want a wireless network
2
connection, do not run the
Ethernet cable through the cable
cover. For more information
about network connection,
see 'Network setup'.