Important - Bang & Olufsen Playmaker Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 38
Remote operation
You can operate Playmaker with
Beo4 and Beo6.
> Start playback from your hand-
held device.
> To select an AirPlay or DLNA
source, press A.MEM on Beo4.
On Beo6, press AIRPLAY*
> To select a source connected via
line-in, press LIST and bring up
A.AUX in the Beo4 display, then
press the centre button. On
Beo6, press LINE IN.*
2
> Use the volume button/volume
wheel to adjust volume.
*Your Beo4/Beo6 may be
2
configured differently. See the
documents supplied with your
Beo4/Beo6.
NOTE! Operation with the Beo4
remote control can only take place
when A.MEM or A.AUX is shown
in the remote control display. On
Beo6 AIRPLAY and LINE IN must
be shown in the remote control
display.
Cleaning
Wipe dust off the surfaces using a
dry, soft cloth. Do not use liquid
cleaners or aerosol cleaners.
To remove stains or dirt, use a soft,
damp cloth and a solution of water
and mild detergent, such as
washing-up liquid.
.
2

Important!

– Avoid placing the product in
direct sunlight or direct artificial
light, such as a spotlight.
– Make sure that the product is set
up, placed and connected in
accordance with the instructions.
– Place your product on a firm
surface.
– Do not subject the product to
high humidity, rain or sources of
heat.
– The product is intended for
indoor use in dry, domestic
environments only. Use within a
temperature range of 10–40°C
(50–105°F).
– If the product has been exposed
to temperatures below 5°C
(40°F), leave it at room
temperature and wait until the
product has regained normal
room temperature before it is
connected to the mains and
switched on.
– Leave enough space around the
product for adequate ventilation.
– Do not attempt to open other
parts of the product than the
back cover. Leave such
operations to qualified service
personnel.
Technical specifications, features
and the use thereof are subject to
change without notice.
13
Tabla de contenido
loading

Tabla de contenido