Electric Wiring Diagram; Troubleshooting - Pleasant Hearth L-24 Manual Del Usuario

ELECTRIC WIRING DIAGRAM

Any electrical repairs or rewiring of this unit should be carried out by a licensed electrician in
accordance with national and local codes.
CIRCUIT DIAGRAM
Disconnect power before servicing.
Any electrical re-wiring of this appliance must be done by a qualified electrician.
This wiring must be done in accordance with local codes and/or in Canada with
the current CSA Standard C22.2 No 12-1982 (R2004), and for US installations,
the ANSI/UL Standard 153 12
If repairing or replacing any electrical component or wiring, the original
wire routing, color coding and securing locations must be followed.

TROUBLESHOOTING

PROBLEM
Log set does
not operate; the
ON/OFF power
light on the control
panel is not lit.
DANGER
POSSIBLE CAUSE
1. The log set is not
plugged in.
2. A circuit breaker is tripped
or a fuse blown.
3. Defective ON/OFF switch.
4. Defective adaptor.
1 white
3 black
Ed.
th
CORRECTIVE ACTION
1. Make sure the log set is plugged in
to a standard 120-volt outlet and into
the base of the unit.
2. Check additional appliances on the
circuit; ideally the appliance should be
on a dedicated 15-amp circuit.
3. Call customer service.
4. Call customer service.
9
2 white
4 black