Se Genera Ierrs Cuando 100Mb/Full With Forced Speed/Duplex Se Define En E1000G.conf (Cr 6555486) - Fujitsu SPARC Enterprise T5120 Notas Del Producto

Se genera Ierrs cuando 100Mb/Full With Forced
Speed/Duplex se define en e1000g.conf
(CR 6555486)
El parámetro ForcedSpeedDuplexpuede provocar Ierrs. La siguiente salida de
código muestra un ejemplo de implantación de la solución provisional en el archivo
. En este ejemplo, el dispositivo e1000g0 se configura para dúplex total
e1000g.conf
de 100Mb utilizando la negociación automática.
ForceSpeedDuplex=7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7;
# This will force Speed and Duplex for following settings
for a typical instance.
# 1 will set the 10 Mbps speed and Half Duplex mode.
# 2 will set the 10 Mbps speed and Full Duplex mode.
# 3 will set the 100 Mbps speed and half Duplex mode.
# 4 will set the 100 Mbps speed and Full Duplex mode.
# 7 will let adapter autonegotiate.
AutoNegAdvertised=8,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0;
# This parameter determines the speed/duplex options that
will be
# advertised during auto-negotiation. This is a bitmap with
the
# following settings.
# Bit
# Setting| N/A | N/A | 1000F |
#
# For example:
# To advertise 10 Half only AutoNegAdvertised
# To advertise 10 Full only AutoNegAdvertised
# To advertise 10 Half/Full AutoNegAdvertised
# To advertise 100 Half only AutoNegAdvertised
# To advertise 100 Full only AutoNegAdvertised
# To advertise 100 Half/Full AutoNegAdvertised
# To advertise 1000 Full only AutoNegAdvertised = 32
# To advertise all speeds AutoNegAdvertised
| 7 | 6 | 5
N/A
| 4 | 3 |
| 100F | 100H | 10F | 10H
= 1
Capítulo 2 Novedades de última hora
2 | 1 | 0
= 2
= 3
= 4
= 8
= 12
= 47
31