Festo CPV GE-DN3-8 Serie Instrucciones Para El Usuario página 25

5 Addressing
The following applies in general for addressing the
CPV Direct:
1. A CPV valve terminal always occupies 16 output
addresses.
A CP valve location occupies two addresses:
2. CP valve terminals, electric input or output modules on
the CP extension string each occupy 8, 16, ... input or
output addresses depending on the design. Note the
relevant documentation for the module.
Detailed information and examples for configuration of
and addressing the CP system can be found in the manual
P.BE−CP−DN3−...
The tool change configuration is also described there.
Festo CPV...−GE−DN3−8 0709NH English
lower−value address =
higher−value address =
pilot solenoid 14
pilot solenoid 12
25