Safety; Intended Use; Possible Misuse; Personnel Qualification - Speck Normblock Multi Serie Traducción De Las Instrucciones Para El Manejo Originales

Pos: 37 /Technische Dokumentation/Betriebsanleitung/Sicherheit/Sicherheit @ 0\mod_1427704077019_370.docx @ 26502 @ 1 @ 1
2

Safety

Pos: 38 /Technische Dokumentation/Betriebsanleitung/Sicherheit/Bestimmungsgemäße Verwendung/Bestimmungsgemäße Verwendung Multi @ 4\mod_1449223216929_370.docx @ 54355 @ 2 @ 1
2.1

Intended use

The pump/unit is intended for the circulation of swimming pool
water.
Observing the following information is vital for intended use:
• This manual
• Supplier documentation
The pump may only be operated within the application limits and
characteristics, as specified in this manual.
Any other use or use exceeding this is not an intended use and
must first be authorized by the manufacturer/supplier.
Pos: 39 /Technische Dokumentation/Betriebsanleitung/Sicherheit/Bestimmungsgemäße Verwendung/Mögliche Fehlanwendungen Multi @ 4\mod_1449223253987_370.docx @ 54371 @ 3 @ 1
2.1.1

Possible misuse

• Installing the pump/unit with stress on the pipes.
• Using the pump/unit beyond the operating limits specified in
the pump data sheet, e.g. excessive system pressure or
pressure surges on the unit side.
• Opening and servicing of the pump/unit by unqualified
personnel.
• Operating the pump/unit in a partly assembled state.
• Operating the pump/unit without pumping liquid.
• Incorrect installation of the pump/unit.
Pos: 40 /Technische Dokumentation/Betriebsanleitung/Sicherheit/Personalqualifikation/Personalqualifikation ohne Kinder - Gerät @ 4\mod_1449586347232_370.docx @ 58268 @ 2 @ 1
2.2

Personnel qualification

This unit can be used by persons with limited physical, sensory or
mental capacity or by people with a lack of experience or
knowledge, provided that they are supervised or have been
instructed in the safe use of the unit and understand the resulting
dangers.
 Ensure that the following work is only performed by trained
professionals with the following qualifications:
– For mechanical work, for example replacing ball bearings
or mechanical seals: qualified mechanics.
– For work on the electric system: electricians.
 Ensure that the following requirements are fulfilled:
04/2016
Safety
EN 9