Operating The Appliance; Using The Touch Controls; Switching Off; Switching On - Caso Pro Slide 2100 Manual De Instrucciones Original

15.4 Operating the Appliance

15.4.1

Using the Touch Controls

15.4.2

Switching Off

15.4.3

Switching On

15.4.4

Power Stage

caso ProSlide 2100
• The controls respond to touch, so you don't need to apply
any pressure.
• Use the ball of your finger, not its tip.
• You will hear a beep each time a touch is registered.
• Make sure the controls are always clean, dry, and that there
is no object (e.g. a utensil or a cloth) covering them. Even a
thin film of water may make the controls difficult to operate.
The complete appliance is switched off using the Master
On/Standby switch (1).
Please note
► Note that the appliance's fan continues to operate for a while
after the appliance has been switched off in order to dissipate the
heat that has built up in the appliance.
Plug in the device and the display shows "0000"
Press the Master On/Standby switch (1), it displays "- - - -".
Place a suitable cooking pot with its contents to be cooked on the
centre on the hob (Ø 120 mm - 260 mm).
Press the selection key +/- (2) as long as necessary to select
the power stage (Indicator lamp showing correct power stage).
With the + / - Keys (2) or the Slider (6), you can change
the settings at any time in a range from 1 – 12.
Operation and Handling
55