Setup; Setup Location Requirements - Caso Pro Slide 2100 Manual De Instrucciones Original

13.5 Setup

13.5.1

Setup location requirements:

caso ProSlide 2100
Returning the packaging back to the material loop saves raw
materials and reduces the quantities of accumulated waste. Take
any packaging materials that are no longer required to "Green
Dot" recycling collection points for disposal.
► If possible, keep the original packaging for the device for the
duration of the guarantee period of the device, in order that the
device can be re-packaged properly in the event of a
guarantee claim.
In order to ensure the safe and trouble-free operation of the
device, the setup location must fulfil the following prerequisites:
 The appliance must be positioned on a solid, even, horizontal
and heat-resistant base with sufficient load-supporting capacity
for the appliance itself plus the heaviest anticipated cooking
contents.
 The induction cooker must not be operated on a base with an
iron or steel content, as this can heat up considerably.
 Select an installation location where children cannot reach the
appliance's hot surface.
 The appliance is not intended as a built-in appliance.
 Do not set up the device in a hot, wet or extremely damp
environment or near flammable material.

Do not set up the induction cooker in the vicinity of appliance
and objects which react sensitively to magnetic fields (e.g.:
Radios, televisions, cassette recorders, etc.).
 To operate correctly, the appliance requires a sufficient flow of
air. Leave a 10 cm gap on all sides when setting up the
appliance.
 The cool air is drawn in by the underside of the appliance. Do
not cover or block any of the appliance's openings.
 The electrical socket must be easily accessible so that the
power lead can be disconnected easily, in the case of an
emergency.
 The installation and assembly of this device in non-stationary
setup locations (e.g. on ships) must be carried out by specialist
companies / electricians, provided they guarantee the
prerequisites for the safe use of this device.
Design and Function
Please note
47