Audio Adjustments; Introduction Of Audio Adjustments; Using Balance Adjustment; Using The Btb (Bass Treble Booster) - Pioneer KEH-P2030R Manual De Operación

Section

Audio Adjustments

08
Introduction of audio
adjustments
1
1 BTB indicator
Shows when the BTB other than FLAT is se
lected.
2 Audio display
Shows the audio adjustments status.
3 LOUD indicator
Appears in the display when loudness is
turned on.
% Press AUDIO to display the audio func-
tion names.
Press AUDIO repeatedly to switch between
the following audio functions:
FAD (balance adjustment)BAS (bass adjust
ment)TRE (treble adjustment)LOUD
(loudness)SLA (source level adjustment)
# When selecting the FM tuner as the source,
you cannot switch to SLA.
# To return to the display of each source, press
BAND.
Note
If you do not operate the audio function within
about 30 seconds, the display is automatically re
turned to the source display.

Using balance adjustment

You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
16
En
HHHHHHHHHHHHHH
2 3
Black plate (16,1)
1 Press AUDIO to select FAD.
Press AUDIO until FAD appears in the display.
# If the balance setting has been previously ad
justed, BAL will be displayed.
2 Press VOLUME up/+ or down/ to ad-
just front/rear speaker balance.
Each press of VOLUME up/+ or down/
moves the front/rear speaker balance towards
the front or the rear.
FAD F15  FAD R15 is displayed as the front/
rear speaker balance moves from front to rear.
# FAD 0 is the proper setting when only two
speakers are used.
3 Press c or d to adjust left/right speaker
balance.
When you press c or d, BAL 0 is displayed.
Each press of c or d moves the left/right
speaker balance towards the left or the right.
BAL L 9  BAL R 9 is displayed as the left/right
speaker balance moves from left to right.
Using the BTB (bass treble
booster)
There are five stored BTB settings such as
DYNAMIC, POWER, MAX, CUSTOM and
FLAT that can easily recall at any time.
! CUSTOM is an adjusted BTB setting that
you create.
! When FLAT is selected no supplement or
correction is made to the sound. This is
useful to check effect of the BTB settings
by switching alternatively between FLAT
and set BTB setting.
% Press BTB to select the desired BTB set-
ting.
Press BTB repeatedly to switch between the
following BTB setting:
MAXCUSTOMFLATDYNAMIC
POWER
<CZR2959-A>16