Maintenance And Service; Maintenance And Cleaning; After-Sales Service And Application Service - Bosch PAM 220 Manual Original

32 | English
Notes on "Compound Mitre" Operating Mode
The calculated mitre angle "MTR" can only be taken over for chop and mi-
tre saws, for which the setting for vertical cuts is 0°. When the setting for
vertical cuts is 90°, the angle for the saw must be calculated as follows:
90° – indicated "MTR" angle = angle to be set on the saw.

Maintenance and Service

Maintenance and Cleaning

Keep the measuring tool clean at all times.
Do not immerse the measuring tool in water or other fluids.
Wipe off debris using a moist and soft cloth. Do not use any cleaning agents
or solvents.
When the measuring tool is exposed to rain for an extended period, its
function may be impaired. However, after completely drying off, the meas-
uring tool is ready for operation. No calibration is required.

After-sales Service and Application Service

Our after-sales service responds to your questions concerning mainte-
nance and repair of your product as well as spare parts. Exploded views
and information on spare parts can also be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions concerning
our products and their accessories.
In all correspondence and spare parts orders, please always include the
10-digit article number given on the type plate of the measuring tool.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange the collection
of a product in need of servicing or repair.
Tel. Service: (0844) 7360109
E-Mail: [email protected]
1 609 92A 0GC | (24.2.14) Bosch Power Tools