Energy Saving - Philips GC9600 Serie Manual Del Usuario

Putting down the iron during ironing
- During ironing, you can place the iron either on the iron platform or horizontally
on the ironing board. Thanks to the OptimalTemp technology, the soleplate will
not damage the ironing board cover.

Energy saving

ECO mode
- By using the ECO mode (reduced amount of steam), you can save energy without
compromising on the ironing result. The green light is on.
- You can deactivate the ECO mode by pressing the ECO button. The green light
goes off.
Safety auto-off mode
- To save energy, the appliance switches off automatically when it has not been
used for 10 minutes. The auto-off light in the on/off button starts to flash.
- To activate the appliance again, press the on/off button. The appliance then
starts to heat up again.
Note: The appliance is not switched off completely when it is in safety auto-off
mode. To switch off the appliance, press the on/off button.
Turbo steam
For faster ironing and a higher amount of steam, you can use Turbo steam.
1 Press and hold the on/off button for 2 seconds until the light turns white.
2 sec.
2 To deactivate Turbo steam, press and hold the on/off button again for 2
seconds until the white light turns blue
ENGLISH 9