Care And Maintenance - Muskoka ES-217-10 Guía De Uso Y Cuidado

Care and Maintenance

Cleaning
Always turn the stove OFF and unplug the power cord from the outlet before cleaning. Use a
vacuum or duster to remove dust and dirt from the heater and vent areas. To maintain the finish,
clean with a soft, slightly damp cloth and buff with a dry cloth. Never use abrasive cleansers, liquid
sprays, or any cleaner that could scratch the surface. Never drag the unit across a floor. The added
stress from dragging the unit may cause the legs to break.
Glass Information (some models)
1. Under no circumstances should this product be operated with broken glass.
2. Do not strike or slam the glass.
3. Do not use abrasive cleaners to clean the glass.
4. This product uses tempered glass. Replacement of the glass supplied by the manufacturer should
be done by a qualified service person.
Maintenance of Motors
WARNING :Always disconnect the appliance from the main power supply and allow it to cool
before any servicing operation.
The motors used on the fan heater and flame effect are pre-lubricated for extended bearing life and
require no further lubrication. However, periodic cleaning/vacuuming of the appliance around the air
intake and exhaust, as well as the fan heater is recommended. For heavy or continuous use, periodic
cleaning must be done more frequently. If the heater blows alternating cold and warm air, check the
fan for free movement and for debris restricting air flow. If the fan does not move freely, the unit must
be turned off and the fan replaced immediately in order to prevent further damage to the unit.
9