Using The Remote Control; Care And Cleaning; Important - Muskoka PHOENIX Manual De Instrucciones

Operation (cont.)
2

Using the remote control

□
NOTE: The main power switch (1) must be on for the remote
control to operate.
□
□ Press the power button (1) and the flame will come on.
□ Press the low heat button (2) for low heat.
□ Press the high heat button (3) for high heat.
□ Press the high heat button (3) again to turn off the heat.

Care and Cleaning

IMPORTANT: Always unplug the power cord before cleaning the unit. Allow the unit to cool before cleaning it.
□ Wipe the exterior surface of the electric firebox occasionally with a soft, damp cloth (not dripping wet), and dry the exterior surface
before operating.
□ Do not immerse the electric fireplace in water.
□ Do not use any cleaning chemicals such as detergents and abrasives.
□ Do not allow the interior to get wet, as this could create a hazard.
□ Light accumulated dust may be removed from the electric fireplace with a soft, dry cloth.
□ To store the electric fireplace, put it back into its original packaging and store in a clean, dry place.
□ The blower and flame motor are pre-lubricated for a durable using time and need no further lubrication or maintenance. Dust
particles will accumulate on/in the electric fireplace, so periodic cleaning/vacuuming of the electric fireplace is recommended.
1
2
B
3
7