Operating Instructions - Muskoka ES-217-10 Guía De Uso Y Cuidado

Operating Instructions

Read All Instructions Before Use
Check that the heater outlet grill is not covered or obstructed in anyway, and make sure the
power to the unit is switched on.
NOTE: When the heat function is used for the first time, a slight odor may be present. This is
normal and should not occur again unless the heater is not used for an extended period of time.
Control Panel
The control panel is located behind the door of the stove.
Your Muskoka stove has the following functions:
®
1. 2.
8
3.
ALL OFF
No power to the unit.
All switches are in the
off position.
POWER ON
Power switch is
activated. Flame and
ember bed effects
activated. No heat.
1. High heat (1350 Watts)
2. Low Heat (700 watts)
3. On/Off Power to the unit
Please note: Both the low heat and the high
heat switches must be in the on position to
achieve high heat.
POWER ON - LOW HEAT
Power switch is activated.
Flame and ember bed effects
activated. Low heat switch is
activated. Low heat and fan
are activated.
POWER ON - HIGH HEAT
Power switch is activated.
Flame and ember bed effects
activated. Low heat switch is
activated. High heat switch is
activated. High heat and fan
are activated.