Fitting The Batteries; Unico Boiler Master Remote Control; Description Of The Remote Control; General Power-On And Management Of Unico Boiler Master - Olimpia splendid UNICO BOILER MASTER Instrucciones Para La Instalación, Uso Y Mantenimiento

3
- remove the batteries in case of prolonged disuse of the remote control.
3.2.2

Fitting the batteries

The remote control exclusively requires 2 dry LR03 1.5 V batteries (not included with the supply).
Used batteries should be disposed of solely by depositing them into the appropriate collection points arranged by the Local Authorities
Replace both batteries at the same time.
To insert the batteries remove the spring-latch cover on the back of the remote control.
The batteries have to be inserted according to the positive and negative pole markings in the bottom of the battery compartment.
Close the spring-latch cover after inserting the batteries.
3.3 UNICO BOILER MASTER
The remote control is the interface between the user and the air conditioner. It is therefore particularly important to familiarize
yourself with the parts of the remote control that relate to this interface.
3.3.1

Description of the remote control

Buttons: used to set or bring up machine functions.
T1
T2 Well-being key (automatic)
T3 Night well-being mode.
T4 Operating mode selector.
T5 Fan speed selector.
T6 Button for setting timer and programs.
T7
T8 Button for activating the FREE COOLING air change system (not available in this model).
T9
T10 Reset button.
T11 Program start button.
Display: shows the operating state and the values of the settings being carried out.
D1 Fan speed or automatic operating mode indicator (AUTO).
D2 Heating.
D3 Cooling.
D4
D5 Air change activation (not available in this model).
D6 Night operation switch.
D7 Automatic operation switch.
D8 First operating program switch.
D9 Second operating program switch.
D10
operating and NIGHT MODE buttons.
3.3.2

General power-on and management of UNICO BOILER MASTER

the power plug of the appliance into the main power supply socket.
ref. B); to run it must be in "I" position.
The device emits a beep when it receives a command.
The maximum distance for transmission of commands is about 8 meters.
3.3.3 Turning the unit ON/OFF
The system for controlling the appliance is equipped with a memory so all the settings will not be lost when the unit is switched off.
50