Carrying Handle - Chicco TRIO MY City Instrucciones De Uso

fore placing the child inside.
• Keep the plastic bags away from
children to prevent suffocation
risks.
• Products exposed to direct sunlight
will heat up; let them to cool down
before placing a child inside.
• The carrycot is not designed for
children to sleep in for a long pe-
riod of time: this product is not a
substitute for a cot.
• It is recommended to air the car-
rycot in case it has been used for a
long time.
• Before lifting or transporting the
carrycot, the base needs to be ad-
justed to the lowest position.
• The child's head in the carrycot
must never be kept lower than the
child's body.
TIPS FOR CLEANING AND MAINTENANCE
This product requires periodical maintenance.
Cleaning and maintenance operations must be performed
exclusively by an adult.
CLEANING
Clean all fabric parts with a damp sponge and neutral de-
tergent. Please refer to the care labels for instructions on
how to clean the fabric parts.
Periodically wipe clean plastic parts with a soft damp cloth.
Do not use solvents or abrasive products.
Always dry the metal parts to prevent the formation of rust
if the folding cot has come into contact with water.
MAINTENANCE
Lubricate the moving parts only if necessary, with a light
application of a silicone based lubricant. Always let the
metal dry. Do not submerge the carrycot in water. Routine-
ly wipe clean plastic parts with a soft damp cloth. To avoid
friction, ensure that the locking devices of the carrycot and
stroller are free from dust or sand. Do not leave the product
exposed to the sun for a long period of time; the fabrics
may discolour.
CARRYCOT FEATURES
HOOD
The carrycot is equipped with a sun canopy and windshield
that can be adjusted to various positions.
ATTACH AND REMOVE
1 – Check that the clip on the end of the arch is hooked to
the buttons on the fabric part. If the buttons are secured
correctly,the two ends of the metal arch are clearly visible
(fig 1).
2 – Insert the two metal parts in the appropriate supports B
and C located in the central part of the carrycot until a click
is heard indicating that they are locked correctly into posi-
tion (Fig. 2 A); then fix the 4 pins of the rear arch (Fig. 2 B).
Note: The connection system is set inside plastic supports B
and C, the round button on the support only serves to hook
on the hood (see point 3).
3 – To remove the canopy, first extract the 4 pins of the rear
arch (fig. 3A) and then release the front arch, pressing the two
buttons located on the base of the locking device (fig. 3B).
WARNING: The incorrect unlocking of the canopy may
cause the breaking of the pins.
HOW TO USE THE HOOD
4 – Inside the hood, between the visor and the first section,
there is a fabric ring from which you can hang soft toys,
with convenient hooks (fig. 4 A).
INTERNAL COVERING AND COVER
5 – To fasten the internal covering to the carrycot: Slip
the plastic band located in the baby's head zone between
the styrofoam support and the body of the carrycot (fig. 5A)
and then fasten the tabs in the baby's foot area under the
edge of the carrycot. Fasten the cover in place using the
two side snap-buttons (fig. 5B) and insert the eyelet over
the relative pin located near the baby's feet (fig. 5C). To fin-
ish the fastening of the cover, fix the buttons to the inside
of the canopy, as shown in figure 5 D and insert the buttons
to the holes on the base of the visor (fig. 5E). For a better
protection the fabric flap can be lifted to button it to the
holes inside the canopy (fig. 5F). The cover of the carrycot
can be used as leg cover for the stroller. Refer to the instruc-
tion manual of the stroller for details about the assembly of
the leg cover configuration.
ADJUSTABLE BACKREST - COMFORT SYSTEM
6 - The carrycot's backrest can be adjusted gradually. To in-
cline or recline the backrest, use the wheel located
on the outer part of the carrycot near the baby's feet
(Fig. 6).
WARNING: • It is recommended to air the carrycot in case
it has been used for a long time.

CARRYING HANDLE

7 - The carrycot features a comfortable carry handle that
can be adjusted in three positions (fig. 7):
A) Transport
B) Middle
C) Rest
8 - To put the handle in the vertical position, grasp it in the
centre and pull it up until you hear a click (fig. 8 A); to put
the handle back in the rest position, press both buttons at
the base of the handle at the same time and then turn it
downwards (fig. 8B).
WARNING: Do not transport the carrycot with the handle
in middle or rest position, but only with the handle in car-
rying position.
WASHING
The covering, the external/internal lining of the carrycot
and the mattress are removable and washable; it is advised
to carefully follow the washing instructions shown on the
item's label.
9