Chicco TRIO MY City Instrucciones De Uso página 10

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
9 – Remove the canopy from the carrycot following the
indications at point 3; then loosen the buttons fixings the
metal arch to the fabric, and remove only the metal arch
pulling it on one of the two ends (fig. 9); do not remove the
rear arch with the 4 pins for the washing operations.
10- To remove the carrycot internal lining, pull the plastic
strip, positioned where the baby's head will lie, and slide it
off the carrycot (fig. 10).
Below are the cleaning symbols and their meanings:
Wash by hand in cold water
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean
USE OF CARRYCOT AS STROLLER
This carrycot can be used in the stroller version mounted
on the Chicco stroller equipped with the "Clik Clak" system.
FASTENING THE CARRYCOT TO THE STROLLER
Prepare the stroller equipped with the corresponding
adaptors with Clik Clak system, to mount the carry out ac-
cording to the stroller's instructions.
11 – Grab the handle in transport position and place the
carrycot on the adaptors with the leg zone facing to the
handle of the stroller (fig. 11).
12 – Match the pins placed on the two sides of the carry-
cot with the hooks on the adaptors of the stroller (fig. 12A),
then place the carrycot until you hear a click (fig. 12B).
WARNING: Before using, make sure that the carrycot is
properly locked on by pulling on it upwards.
RELEASE THE CARRYCOT
13 – Bring the handle in vertical position (transport posi-
tion) until you hear a click (fig. 13).
14– Press the key in the front part of the carrycot (fig. 14A),
then keeping the key pressed, lift the carrycot from the
structure (fig. 14B).
WARNING: The fastening and releasing operations can be
carried out also with your child inside the carrycot; howev-
er, these operations may be more difficult to execute with
the child's weight. Pay attention when carrying out the
above mentioned operations.
WARNING: an incorrect fastening of the carrycot to the
frame (e.g. reverse assembly) can cause a malfunctioning of
the connection system and making the release impossible:
in this case consult the instructions of the stroller or contact
the Artsana Customer Service.
WARRANTY
The product is guaranteed against any conformity defect in
normal conditions of use as provided for by the instructions
for use.
The warranty shall not therefore apply in the case of dam-
ages caused by improper use, wear or accidental events.
For the duration of warranty on conformity defects please
refer to the specific provisions of national laws applicable in
the country of purchase, where provided.
10
Tabla de contenido
loading

Tabla de contenido