Operation And Handling; Details On The Device; Signal Tones; Overheating Protection Facility - Caso SlimLine 3400 Manual Del Usuario

14.1.2

Details on the device

14.1.3

Signal Tones

14.1.4

Overheating Protection Facility

14.1.5

Rating plate

caso SlimLine 3400
This instruction and when "H" is displayed, is to warn that the
ceramic hob may still be hot. Although the induction cooker
itself does not generate any heat during the cooking process,
the temperature of the cooking utensil does heat the hob!
Adhere to the following safety instructions in order to avoid
being burnt by the hot appliance:
ATTENTION
Risk of burning due to hot surface!
► Do not touch the surface of the ceramic hob while it is still
hot ("H" is displayed)
► Do not place any objects on the hot ceramic hob.
The appliance emits an acoustic signal after being switched on
and in the event of a fault.
Please note
► The acoustic signal continues to sound until the fault has
been rectified or the appliance has been switched off.
You will find more detailed information on error messages in the
chapter entitled „7.2 Error Messages".
The appliance is equipped with an overheating protection
facility. If the temperature of the appliance exceeds the critical
limit the appropriate error message is displayed and an acoustic
signal sounds. For safety reasons the appliance shuts off
further power supply. After the cooling-down phase the
appliance can be switched off and then back on again.
Please note
► The acoustic signal continues until the fault has been
rectified or the appliance has been switched off.
You will find more detailed information on error messages in the
chapter entitled „7.2 Error Messages".
The rating plate with the connection and performance data can
be founded on the back of the device.

Operation and Handling

52