Note: make sure that the
corner roof bars lock into the
long sides of the roof connec-
tor. The locking pins must be
facing downwards in order to
prevent water build-up.
Step 6
Insert the corner roof bars (4) into
the corner connectors, and the
roof bars (5) into the T-connectors
(Fig. F).
Note: the locking pins must
click audibly into place.
Step 7
Place the pavilion roof (9) over the
assembled roof frame (Fig. G). Use
the hook-and-loop straps on the
pavilion roof to fasten it to the roof
frame.
Step 8
Secure the product with the ground
pegs (16) (Fig. H).
Warning! Make sure that the
ground pegs are firmly se-
cured.
Note: if the stability of the
ground pegs is insufficient
due to looseness of the
ground, the ground pegs
must be further stabilised or
the legs must be weighed
down.
The product must be anchored
if the ground is too hard to in-
sert the ground pegs. Enquire
at a specialist store about
suitable mounting materials
(not included in the package
contents) for your ground
surface.
Dismantling
Step 1
Remove the ground pegs from the
ground.
Step 2
Undo the hook-and-loop straps and
remove the pavilion roof.
Step 3
Loosen the screws connecting the
roof frame and crossbars.
Release the locking pins on the cor-
ner roof bars and corner connectors.
Caution! Risk of pinching!
Step 4
Lift up the roof frame.
Step 5
Press the locking pins on the roof
bars to pull the roof bars out from
the roof connector.
Step 6
Loosen the screws of the corner
connectors and remove the corner
connectors.
Step 7
Loosen the screws of the crossbars
and press the locking pins to pull the
crossbars apart.
Step 8
Loosen and remove the screws in the
legs.
Step 9
Clean and dry the product before
storing it at room temperature.
Storage, cleaning, care
Storage
When not in use, always store the
product clean and dry at room
temperature.
Cleaning
Clean the product with a damp cloth
and a mild detergent.
Do not use petrol, solvents or harsh
detergents.
Care instructions
The pavilion roof can be treated
with waterproofing spray.
Disposal
Dispose of the article and the pack-
aging materials in accordance with
current local regulations. Packaging
materials such as foil bags are not
suitable to be given to children.
Keep the packaging materials out of
the reach of children.
Dispose of the products and the
packaging in an environmental-
ly friendly manner.
The recycling code is used to
identify various materials for
recycling. The code consists of
the recycling symbol – which is
meant to reflect the recycling cycle
– and a number which identifies the
material.
Notes on the guarantee
and service handling
The product was produced with
great care and under constant
supervision. You receive a three-year
warranty for this product from the
date of purchase. Please retain your
receipt.
The warranty applies only to ma-
terial and workmanship and does
not apply to misuse or improper
handling. Your statutory rights, es-
pecially the warranty rights, are not
affected by this warranty.
With regard to complaints, please
contact the following service hotline
or contact us by e-mail. Our service
employees will advise as to the
subsequent procedure as quickly
as possible. We will be personally
available to discuss the situation
with you.
Any repairs under the warranty,
statutory guarantees or through
goodwill do not extend the warranty
period. This also applies to replaced
and repaired parts.
Repairs after the warranty are sub-
ject to a charge.
IAN: 353216_2007
Service Great Britain
Tel.:
0800 404 7657
Service Ireland
Tel.:
1890 930 034
(0,08 EUR/Min.,
(peak))
(0,06 EUR/Min.,
(off peak))
13
GB/IE