Fora D40 Pro Manual Del Propietário página 31

● Auto Cycle Mode
Always apply the pressure cuff before turning on the meter.
2. After the first measurement is
complete, the meter will start counting
down before the second measurement
begins. The number on the right
represents the remaining countdown
between each measurement. The meter
will take three (3) measurements
consecutively with an interval of 20
seconds.
3. After taking three measurements, the
results are averaged to produce the
blood pressure measurement. Press
to turn off the meter.
1. Press to enter cycle mode. The
meter will automatically take blood
pressure measurement in 2 minutes for
first measurement. The CYC On will
show on the display and keep still until
the remaining time is in 1 minute. The
number on the right represents the
remaining seconds countdown from 59
between each measurement.
2. The cuff will begin to inflate
automatically. After the first
measurement is complete, the meter
will take measurement consecutively in
the selected time intervals for up to 5
hours.
23