Performing A Blood Glucose Test - Fora D40 Pro Manual Del Propietário

Performing a Blood Glucose Test

1. Insert the test strip to turn on the
meter
Wait for the meter to display " "and
" ".
2. Select the appropriate measuring
mode by pressing M button
For selecting the measurement mode,
please refer to "THE FOUR MEASURING
MODES".
3. Obtaining a blood sample
Use the pre-set lancing device to
puncture the desired site. Wipe off the
first appeared drop of blood with a
clean cotton swab. The size of the drop
should be at least as big as (actual
size), which is 0.5 microliter (μL) of
volume. Gently squeeze the punctured
area to obtain another drop of blood. Be
careful NOT to smear the blood sample.
4. Bring strip to sample
While holding the meter in an angled
position with the strip facing down, gently
bring the strip to the sample so that the
absorbent hole can sip in the blood.
Confirmation window should be
completely filled if enough blood samples
have been applied. Do NOT remove the
finger until you hear a beep sound.
18