Buffalo WHR-HP-G54 Guia De Inicio Rapido página 9

EN
Access The AirStation Configuration Pages 5
The WHR-HP-G54 will automatically detect whether your internet is from a
DSL or Cable provider and ask you for any necessary information.
• DSL
If you have a DSL connection, you will probably have to enter your PPPoE
login information. Get this information from your ISP if you don't know it.
• Cable
Most Cable providers require no aditional settings to obtain an IP address. If
your connection requires a DNS server to be set up manually, a wizard will
ask you for the necessary information. Get it from your cable provider if you
don't know it.
Default Settings
If at any time you wish to restore your AirStation's settings to factory defaults,
press the INIT button on the bottom of the AirStation for 15 seconds. Do not
let go of the INIT button until the red DIAG lights up or flashes. The restore
process can take up to two minutes.
This completes the basic AirStation Configuration. To change advanced
settings, please consult the Online Manual on the CD-ROM or go to the
Buffalo Support Web Site: http://www.buffalotech.com
The AirStation can be re-configured anytime via a Web browser using a wired
or wireless connection by entering 192.168.11.1 or 192.168.11.100 if in bridge
mode, in the URL address field of the Web browser and pressing the Enter
key on the keyboard. Of course, if you've changed your AirStation's LAN IP
address, enter the new LAN IP address instead.