Setting The Fan - MAXA Mi26 Manual Usuario/Instalador

- How to set TIMER ON
The button can be used to set the timer programming as wished in order to
switch on the appliance at your desired time.
1) Press button: then, you can press the ''HR'' and ''MIN'' buttons to select your
desired time for switching the unit on.
- Time setting changes by 1 hour each time you press the ''HR'' button.
- Time setting changes by 1 minute each time you press the ''MIN'' button.
2) Press button again to confirm the timer on setting.
3). Once TIMER ON is set, timing starts, and the unit turns off. When the set time is up,
unit turns on and Timer is cleared.
- How to set TIMER OFF
The button can be used to set the timer function as wished in order to switch off the appliance at your desired time.
1) Press button: then, you can press the ''HR'' and '''MIN'' buttons to select your desired time for switching the unit
off.
- Time setting changes by 1 hour each time you press the ''HR'' button.
- Time setting changes by 1 minute each time you press the ''MIN'' button.
3) Press button again to confirm the timer off setting.
4) When OFF Timer is set, before the time is up, the unit keeps on working normally.
When the set time is up, unit stops working immediately regardless of the ambient
temp.
● SLEEP MODE SETTING
SLEEP mode can be set in COOLING, HEATING or AUTO operation mode. This
function gives you a more comfortable environment while sleeping.
During Sleep mode:
- Fan speed is automatically set at low speed;
- Press the " " button to set the unit to the Sleep mode. The
the display. In this mode, the temperature increases/decrease in cooling/heating mode
operation by 1°C every two working hours. After reaching 3°C, the unit maintains this
temperature up to 8 working hours in the "SLEEP" mode, and then switches off
automatically.
Sleep function in cooling mode
Temp. Ts = Set temperature
Ts+3
Ts+2
Ts+1
0 2
Sleep On
● SETTING THE FAN
By pressing the button several times, it is possible to adjust the fan speed as per the
three available speeds, or to activate the AUTO speed. The operating speed appears
on the display:
(Auto)
As for the fan speed, the display shows:
Super low speed
4 6 8
Sleep Off
(Low) (Medium)
Controller display
indicator will light up on
Sleep function in heating mode
Sleep On
0
Ts-3
Ts-2
Ts-1
Hour
Ts = Set temperature
Temp.
(High)
2 4 6
Low speed
Sleep Off
Hour
8
16