Managing Two Mobile Phones (Or Bluetooth Devices); Smart Navi System; Music Via Bluetooth; Sharing Music Via Bluetooth (A2Dp Sharing) - Nolan N-Com B601 X Serie Manual Del Usuario

10

MANAGING TWO MOBILE PHONES (OR BLUETOOTH DEVICES)

The B601 system can be hooked up to two phones (or Bluetooth) devices at the same time.
The second phone (secondary device) can receive calls but not make them.
To pair up the second Bluetooth phone (secondary device):
 Make sure the B601 is turned off.
 Put the system in the "Configuration" menu: press the "n" key and keep it pressed for 4 seconds, until you
hear the voice announcement " Configuration Menu ".
 Press the "" key until you reach the option " Second mobile phone pairing ".
 Turn on the search for Bluetooth devices (smartphone, GPS, MP3 reader) on the device.
 Select the N-Com system from the list. If a password is requested, enter the code 0000 (four zeros).
 After a few seconds, the connection between the two devices is activated.
Once the Bluetooth device has been paired up, connection is automatic when the system is turned on.
If you wish to connect a mobile and a satellite navigator for motorbikes, it is recommended to pair up the
mobile as the MAIN DEVICE (chapter 6) and the navigator as the SECONDARY DEVICE, following the procedure
described above.
N.B.: All information sent through the HFP profile can be received from the second mobile (or secondary
device). It is not possible to listen to information sent through the A2DP profile.
11

SMART NAVI SYSTEM

The "SMART NAVI SYSTEM" function allows you to listen to navigator directions coming from the smartphone
even during an intercom call.
The audio stops to allow transmission of the navigator directions from the smartphone and is automatically re-
established at the end of said instructions.
The "SMART NAVI SYSTEM" function is disabled by default on the device.
You can enable / disable the function from the Configuration Menu (Chapter 7).
N.B.: With the Smart Navi System enabled, all audio information coming from the smartphone (for example,
notification sounds) temporarily stops the audio under way.
You can enable / disable the "SMART NAVI SYSTEM" function by using the N-Com EASYSET
program.
12

MUSIC VIA BLUETOOTH

To pair up an Mp3 device to the B601 system, follow the procedure illustrated in Chapter 8.
Play music (Play)
Pause function (Pause)
Next track (Skip)
Previous track (Rew)

12.1 Sharing music via Bluetooth (A2DP Sharing)

During the intercom connection, you can start playing music by briefly pressing the "" key for about 2
seconds. The music will be played in both systems.
Music sharing temporarily cuts off the intercom conversation; however, this can be automatically restored by
stopping the music (this is done by pressing the "" key for about 2 seconds).
N.B.: Music shared through the intercom can be managed by both systems, for example, both systems can
change the track by pressing the relative command.
N.B.: the "Music Sharing" function can be used with the N-Com series "900" / "600".
Press "" and keep it pressed for about 2 seconds.
When the player is playing music, press "" for about 2 seconds.
When the player is playing music, press "" for about 4 seconds.
When the player is playing music, press "" for about 4 seconds.
17