Repositioning The Padding - Nolan N-Com B601 X Serie Manual Del Usuario

Fig. 16
 Close the small door.
 Pass the USB mini wire through the elastic band found on the comfort padding (Fig. 17).
 Position the wiring in the rear part of the helmet (Fig. 18).
Fig. 17
 Connect the battery to the wiring system (Fig. 19).
 On the right side of the helmet, bend the cheek pad lining and insert the battery in its housing (Fig. 20-21).
Fig. 19
Fig. 22
3.4

Repositioning the padding

 Reposition the internal comfort padding by following the specific instructions provided in the helmet user
manual.
Warning: Always verify the proper length of your chinstrap and adjust it if necessary, referring to the specific
helmet instructions.
 Hook up the microphone to the connector coming out of the e-Box (Fig.
15).
 Position the wiring and the connectors behind the cheek pad lining,
lifting it with the help of a flat head tool (Fig. 16).
Fig. 18
Fig. 20
 Position the right loudspeaker in its housing, inserting the cable in the
special groove (Fig. 22). If necessary, secure the earphone using the
adhesive supplied as standard equipment.
 Position the wiring and the connectors behind the cheek pad lining,
lifting it up with the help of a flat head tool.
Fig. 21
9