Transit Wheels (Optional) - Ki Mobility Catalyst 5Vx Manual De Instrucciones

V. SET UP & USE OF YOUR WHEELCHAIR
Y. Transit Wheels (Optional)
Transit wheels can be used to negotiate narrow passageways where your wheelchair would be too
wide if the rear wheels are used (e.g., in airplanes, buses, doorways, etc.). The transit wheels should
be setup at such a height that allows you to maintain control and stability while in use. When
removing the rear wheels ensure you are doing so in a way which allows you to maintain control and
stability with the support of a stable and solid surface on either side of you. When removing the rear
wheels it is important to keep them within reach. You will require the use of an attendant or a solid
structure to help move you through the narrow passageway since you will not be able to use the rear
wheels for mobility. While transit wheels are in use, the wheel locks will not be operational. Transit
wheels are intended to use over short distances such as through doorways and airplane aisles. They
do not replace the purpose or function of the rear wheels.
WARNING: Never use transit wheels on soft or uneven ground where the transit wheels can sink
into the surface. This could result in a loss of stability causing a fall which could cause serious injury
or death.
• Before use, ensure transit wheels are set at the same height and have been adjusted to a
height which does not create instability. Failure to do so could result in a loss of stability
causing a fall which could cause serious injury or death.
• While in use, take caution to ensure obstacles are not located under the base of the
wheelchair which could potentially catch the transit wheel and cause a sudden loss of
mobility. Failure to do so could result in a loss of stability causing a fall which could cause
serious injury or death.
• Take caution to ensure you are able to remain in control of the chair and that you are not
located on an upward or downward slope which could cause you to lose control of the
wheelchair. Failure to do so could result in a loss of stability causing a fall which could cause
serious injury or death.
• Failure to read and heed these instructions may result in damage to your wheelchair, a fall or
loss of control causing severe injury to the user or others.
1. Installation (Fig. 34)
a. Install transit wheel into rear frame and secure with bolt and nut.
2. Adjusting Height (Fig. 34)
a. Remove bolt and nut from transit wheel.
b. Slide transit wheel up or down to correct height.
c. Secure desired height by reinstalling bolt and nut.
Fig. 34
34