Extension Tubes - Ki Mobility Catalyst 5Vx Manual De Instrucciones

Ocultar thumbs Ver también para Catalyst 5Vx:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

V. SET UP & USE OF YOUR WHEELCHAIR
I. Extension Tubes
1. Adjustment
a. Remove mounting fasteners from each side of the hanger tube.
b. Slide footrest extension tube to the desired height.
c. Line up holes and reassemble fasteners in desired hole through hanger and extension tube.
d. Follow same procedure on opposite side (Fig. 10).
At the lowest point, footrests should be at least 2½ inches (6.35 cm) off the ground. If set too low,
they may "catch" on obstacles you would expect to find in normal use. This may cause the chair to
stop suddenly and tip forward (Fig. 11).
WARNING: Avoid tripping or falling when you transfer. Ensure your feet do not get caught in the
space between the footrests and avoid putting weight on the footrests as the chair may tip forward.
A trip or fall could result in serious injury.
Fig. 10
Fig. 11
2.5"
21

Capítulos

Tabla de contenido
loading

Tabla de contenido