Repair; Accessories - Festo DGC-HD Instrucciones De Utilizacion

DGC-HD
• Grease the following components:
Lubricating point ( Fig. 1)
Lubrication interval
2)
Grease
1) Or if there is no longer a layer of grease on the component
2) Grease gun, blast pipes and grease (
Tab. 6
To grease the bearing guide:
1. Calculate the load comparison factor fv with
the aid of the formula for combined loads
( 11 Technical data) and determine the lub-
ricating interval S
int
2. Grease the bearing guide on both sides at all
lubrication holes 3.
3. Move the slide the complete travel distance
during lubrication in order to distribute the
grease evenly inside.
Alternatively, Festo offers a service inspection
which includes lubrication.
Otherwise, the DGC-HD is maintenance-free.
8

Repair

• Recommendation: Send the DGC-HD to our repair service.
This way the required fine tuning and tests will be taken into special consideration.
• Information about spare parts and accessories can be found at: (
To replace cushioning elements:
• Observe the section "For precision adjustment of the stroke" (
9

Accessories

Note
• Please select the corresponding accessories from our catalogue
( www.festo.com/catalogue).
Festo – DGC-HD – 1304NH English
Bearing guide
Lubrication hole 3
( Fig. 13)
Roller bearing grease
9 Accessories)
from it ( Fig. 13).
Guide rail
Surface 2
As required
Fig. 13
Fig. 14
www.festo.com/spareparts).
6 Commissioning).
1)
f v
3
27