Optional Attachments - Sammic CF-5 Manual De Instrucciones

This user manual explains how to install and
maintain the CF-5 hand-operated potato-
chipping machine.
This machine has been designed and manu-
factured
according
to
the
Machinery Directive 98/37/EEC.
SETTING UP
1. Fix the feet with bolts.
2. Lift the lever to the highest position.
3. With the lever in that position, set one
end of the spring in the upper pin and
stretch the spring downward until it fits
into the lower pin.
European
4. Repeat step 3 with the other spring.
5. When you have finished fitting both
springs, the machine is ready to work.
CLEANING
For optimum cleaning of your CF-5 hand-
operated potato chipper, remove the grid
and pusher. To do so, undo the fixing
screws.
Clean all the parts that have been in contact
with food with hot water and food-compati-
ble detergent immediately after use. Then,
rinse with plenty of hot water and disinfect
with a soft cloth impregnated with ethyl
alcohol (90º).
The grid cutters are sharp. Handle them with
care when washing them.
MOUNTING THE GRID-PUSHER SET
1. Machine without grid and pusher
2. Set the grid in the lower housing and fix
it with washers and screws.
3. Put the pusher on the grid.
4. Lower the lever and with the lever com-
pletely down, secure the pusher to the
body with screws.
5. Lift the lever.

OPTIONAL ATTACHMENTS

The CF-5 hand-operated potato chipper can
be fitted with grid-pusher sets in the follo-
wing sizes:
- 8x8 mm
- 10x10 mm
- 12x12 mm
ENGLISH 3