IMPORTANT: The manual you are reading contains fundamental information regarding the safety
measures to be adopted when installing and starting up. It is therefore of utmost importance that
both the installer and the user read the instructions before assembling and starting up.
1. GENERAL SAFETY INSTRUCTIONS
These symbols (
corresponding instructions.
DANGER. Electrocution risk
Non-compliance with this instruction involves a risk of electrocution.
DANGER.
things.
ATTENTION.
pump or the unit.
2. GENERAL SAFETY RULES
GENERAL OBSERVATIONS
•
The machines mentioned in this manual are especially designed to carry out the pre-
filtration and the circulation of water in swimming pools.
•
They are designed to work with clean water at a temperature that does not exceed 35ºC.
•
Installation should be carried out in accordance with the specific indications for each step.
•
The regulations in force for the prevention of accidents should be heeded.
•
Any modification that may be made to the pump requires the previous authorisation of the
manufacturer. The original manufacturer-authorised spares and accessories guarantee
greater safety. The pump manufacturer is exempt from all responsibility for damage
caused by the use of unauthorised spares or accessories.
•
During operation the electrical parts of the pump are live. Work can only be carried out on
each machine or on connected-equipment after having disconnected them from the
electrical supply network and having disconnected the starting mechanisms.
•
The user must make sure that assembly and maintenance work is carried out by qualified
and authorised people who have previously carefully read the installation and service
instructions.
•
The operating safety of the machine is only guaranteed with the compliance and respect
for that mentioned in the installation and service instructions.
•
The value limits stated in the table of technical specifications must under no
circumstances be exceeded.
•
In the case of defective operation or breakdown, contact the nearest manufacturer's
agent or the manufacturer's Technical Customer Service.
) represent the possibility of danger as a result of not following the
Non-compliance with this instruction involves a risk of danger to people or
Non-compliance with this instruction involves a risk of damaging the
27
ENGLISH