Important Safety Instructions; Risk Of Electric Shock Or Electrocution - Mi-T-M Corporation HHM Serie Manual Del Operador

WARNING: When using this product, basic precautions should always be observed, including the following:
HAZARD
RISK OF
ELECTRIC SHOCK
OR
ELECTROCUTION
4

IMPORTANT SAFETY INSTRUCTIONS

READ ALL SAFETY WARNINGS BEFORE USING HEATER MODULE
POTENTIAL CONSEQUENCE
Serious injury or death could occur
if the heater module is not properly
grounded.
is powered by electricity and may
cause electric shock or electrocution
if not used properly.
Electrical shock may occur from
electrical cord.
Electrical shock may occur if heater
module is not operated properly.
Serious injury or death may occur if
electrical repairs are attempted by
unqualified persons.
Your heater module
PREVENTION
This product must be grounded. Make sure
the heater module is equipped with a GFCI
built into the power supply cord. If this is not
available, the heater module must be plugged
into a receptacle that is protected by a GFCI.
Disconnect when not in use.
If your unit is equipped with a GFCI, DO
NOT drop the GFCI as damage could
result. If the GFCI is accidentally dropped,
be certain to test the GFCI before using
to ensure it is working properly. (Follow
instructions on GFCI for test procedures.)
Always be certain the unit is receiving proper
voltage. Before plugging the unit into a
compatible power source, be certain the
switch is in the "OFF" position. Disconnect
when not in use.
Do not modify the electrical plug. If it will not
fit the outlet, have a proper outlet installed by
a qualified electrician. Do not use any type
of adapter.
Check power cord for signs of crushing, cutting
or heat damage. If replacement of plug or
cord is needed, use only identical replacement
parts.
Do not use extension cords with this heater
module.
Keep all connections dry and off the ground.
Do not allow electrical cords to lay in water or
in such a position where water could come
in contact with them. Do not touch plug with
wet hands.
Do not pull on the electrical cord to disconnect
from the outlet.
DO NOT direct spray on or into electrical
installations of any kind! This includes electrical
outlets, light bulbs, fuse boxes, transformers,
the unit itself, etc.
DO NOT allow metal components of the heater
module to come in contact with live electrical
components.
Never operate the heater module with safety
guards/covers removed or damaged.
Any electrical wiring or repairs performed on this
heater module should be done by Authorized
Service Personnel in accordance with National
and Local electrical codes.
Before opening any electrical enclosure, always
shut off the heater module, relieve pressure
and unplug the heater module from the power
source. Allow the heater module to cool down.
Never assume the heater module is safe to
work on just because it is not operating. It
could restart at any time! Service in a clean,
dry, flat area.
Operator's Manual