Power Cord Connection; Extension Cords - Mi-T-M Corporation HHM Serie Manual Del Operador

INSTALLATION & PREPARATION

POWER CORD CONNECTION:

. Make certain the power switch is in the "OFF" position.
2. Ensure electrical supply is identical to the specifications listed on the
heater module data plate.
3. GROUNDING INSTRUCTIONS: This product must be grounded. If
it should malfunction or breakdown, grounding provides a path of
least resistance for electric current to reduce the risk of electric shock.
This product is equipped with a cord having an equipment-grounding
conductor. The plug must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with all local codes and
ordinances.
4. DANGER: Improper connection of the equipment-grounding conductor
can result in a risk of electrocution. Check with a qualified electrician or
service personnel if you are in doubt as to whether the outlet is properly
grounded. Do not modify the plug - if it will not fit the outlet, have a proper
outlet installed by a qualified electrician. Do not use any type of adaptor
with this product.
5. GROUND FAULT CIRCUIT INTERRUPTER PROTECTION: This heater
module is provided with a Ground Fault Circuit Interrupter (GFCI) built into
the plug or the power supply cord, test the GFCI each time it is plugged
into an outlet according to instructions on the GFCI. DO NOT use the
heater module if the test fails! The GFCI provides additional protection
from the risk of electric shock. Should replacement of the plug or cord
become necessary, use only identical replacement parts that include
GFCI protection.

6. EXTENSION CORDS:

RECOMMEND THE USE OF EXTENSION CORDS!
extension cord is unavoidable, it must be plugged into a GFCI found in
circuit boxes or protected receptacles. When using an extension cord,
consult a qualified electrician to determine the proper wire gauge needed
for the length of the extension cord.
Use only 3-wire extension cords that have 3-prong grounding-type plugs
and 3-pole cord connectors that accept the plug from the product.
Use only extension cords that are intended for outdoor use. These
extension cords are identified by a marking "Acceptable for use with
outdoor appliances; store indoors while not in use." Use only extension
cords having an electrical rating not less than the rating of the product.
Do not use damaged extension cords. Examine extension cord before
using and replace if damaged. Do not abuse extension cord and do
not pull on any cord to disconnect. Keep cord away from heat and
sharp edges. Always connect or disconnect the extension cord from
the receptacle before connecting or disconnecting the product from the
extension cord.
7. Ensure the area between the heater module cord and outlet is kept
dry.
8. Insert the male plug into a grounded AC outlet. DO NOT use an adapter
OR remove the grounding plug!!
Operator's Manual
THE MANUFACTURER DOES NOT
RISK OF ELECTROCUTION!
THIS UNIT MUST BE CONNECTED
TO A PROPERLY GROUNDED
OUTLET.
ADAPTER OR REMOVE THE
THIRD GROUNDING PRONG.
RISK OF ELECTROCUTION!
TO REDUCE THE RISK OF
ELECTROCUTION, KEEP ALL
CONNECTIONS DRY AND OFF
THE GROUND. DO NOT TOUCH
PLUG WITH WET HANDS.
If use of an
DANGER
DO NOT USE AN
WARNING