Important - Steren MUL-650 Manual De Instrucciones

Multímetro profesional bluetooth
Ocultar thumbs Ver también para MUL-650:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

IMPORTANT

Read these manual to avoid any damage.
The instructions of these manual are for reference about the product.
There may be differences due to update.
Please check our web site www.steren.com to obtain the latest version of the instruction
manual.
CAUTIONS
• Improper use of this Multimeter can cause damage, electric shock, or serious injury.
• This product is not a toy; Keep the Multimeter out of the reach of children.
• Always remove test cables before replacing batteries or fuses.
• Check the condition of the test cables and the measurer itself before operating.
• Do not measure voltages exceeding 1000V above ground; Can be risky.
• Be very careful when taking measurements if the voltages are greater than 30 VAC RMS or
60 VDC; These voltages are considered a electric shock danger.
• Always discharge the capacitors and cut off the power of the device before performing
diode, resistance or continuity tests.
• To avoid damage to the Multimeter, do not exceed the maximum limits of the input values
shown in the specifications.
• In case of a prolonged period of inactivity, remove the battery.
• This appliance is NOT intended for use by persons with different capacities, unless properly
prepared and supervised.
• Do not use the Multimeter if the battery cover is not in place and fully closed.
NOTES:
The operation of this device is subject to the following two conditions: (1) it is possible that this device may not cause harmful
interference and (2) this device must accept any interference, including interference that may cause undesired operation.
This multimeter can be connected through an application to view the measurement data from a smartphone. Please refer to the
complete instruction manual on our website www.steren.com to learn how to download the application and connect via
Bluetooth.
1

Capítulos

Tabla de contenido
loading

Tabla de contenido