Intended Use; Jigsaw Safety Warnings; Residual Risks - Ryobi RJS1050 Traducción De Las Instrucciones Originales

Safety, performance, and dependability have been given
top priority in the design of your jigsaw.

INTENDED USE

The jigsaw is intended to be used only by adults who have
read and understood the instructions and warnings in
this manual, and can be considered responsible for their
actions.
to cut wood, plastic, drywall, and metal up to the depth
The product is designed for handheld use. The product
instructions about how to do this are given by the
manufacturer of the product.
Do not use the product for any other purpose. Use of the
product for operations different from intended could result
in a hazardous situation.
WARNING
Read all safety warnings, instructions, illustrations
and specifications provided with this power tool.
Failure to follow all instructions listed below may result in
Save all warnings and instructions for future reference.

JIGSAW SAFETY WARNINGS

Hold the power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord. Cutting accessory contacting a "live" wire may
make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
Use clamps or another practical way to secure and
support the workpiece to a stable platform. Holding
the workpiece by hand or against your body leaves it
unstable and may lead to loss of control.
Use the dust collection device or connect a dust
extraction vacuum when operating the product.
Keep mains lead clear from working range of the
machine. Always lead the cable away behind you.
Wear a dust mask.
Additional safety instructions
Avoid running the product at low speeds for extended
periods of time. Running at low speeds under constant
usage may cause the product to become overheated.
If this occurs, cool the product by running it without a
load at full speed.
Use the correct dust collection system as per the
instructions in this manual.
WARNING
Dust from certain paints, coatings, and materials may
cause irritation, or allergic reactions to the respiratory
system. Dust from wood such as oak, beech, MDF, and
others are carcinogenic. Materials containing asbestos
specialist operators.

RESIDUAL RISKS

Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise and the operator
should pay special attention to avoid the following:
Injury caused by vibration
– Use the lowest speed setting which achieves the
cutting, limit exposure. See Risk Reduction.
Injury caused by dust
– Dust may enter the eyes or respiratory system.
Wear eye protection at all times. Wear appropriate
dust control mask with filters suitable for protecting
against particles from the material being cut. Do
not eat, drink, or smoke in the work area. Ensure
adequate ventilation.
Injury caused by electric shock
– The blade may contact hidden wiring, causing
parts of the product to become live. Always hold
the product by the designated handles and take
care when blind-cutting into walls and floors where
cables may be hidden.
Injury caused by contact with the blade
– The blades are very sharp and will become hot
during use. Wear gloves when changing blades.
Keep hands away from the cutting area at all times.
Clamp the workpiece whenever possible.
Injury caused by noise
– Noise can damage hearing. When using power
tools for an extended period of time, wear hearing
protection.
RISK REDUCTION
It has been reported that vibrations from handheld tools
may contribute to a condition called Raynaud's Syndrome
in certain individuals. Symptoms may include tingling,
upon exposure to cold. Hereditary factors, exposure to
cold and dampness, diet, smoking and work practices
are all thought to contribute to the development of these
symptoms. There are measures that can be taken by the
operator to possibly reduce the effects of vibration:
EN
English
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
EL
1