Accessories; Recommended Cutting Equipment; Kickback And Guide Bar Nose Radius; Low Kickback Saw Chain - Zenoah GZ4350 Manual De Usuario

Sound power level, guaranteed L
3
Sound levels
Equivalent sound pressure level at the operator's ear,
dB(A)
Equivalent vibration levels, a
2
Front handle, m/s
2
Rear handle, m/s
Saw chain/guide bar
Type of drive sprocket/number of teeth
Saw chain speed at 133% of maximum engine power
speed, m/s.

Recommended cutting equipment

Chainsaw model Zenoah GZ4350 has been evaluated
for safety according to EN ISO 11681-1:2011
(Machinery for forestry - Portable chainsaw safety
requirements and testing) and fulfill the safety
requirements when equipped with the below listed guide
bar and saw chain combinations.

Low kickback saw chain

A saw chain that is designated as Low kickback saw
chain, meets the low kickback requirement specified in
ANSI B175.1-2012.
Guide bar
Length, in/cm Pitch, in
15/38 0.325
Pixel
Pixel is a guide bar and saw chain combination that is
more light weight and designated to offer more energy
efficient use by cutting narrow cuts. Both guide bar and
3
Equivalent sound pressure level, according to ISO 22868, is calculated as the time-weighted energy total for
different sound pressure levels under various working conditions. Typical statistical dispersion for equivalent
sound pressure level is a standard deviation of 1 dB (A).
4
Equivalent vibration level, according to ISO 22867, is calculated as the time-weighted energy total for vibration
levels under various working conditions. Reported data for equivalent vibration level has a typical statistical
dispersion (standard deviation) of 1 m/s
320 - 008 - 24.10.2018
dB(A)
WA
4
hveq

Accessories

Gauge, Max. nose ra-
in/mm dius
0.050/1.3 10T
2
.
Zenoah GZ4350
113
101
4.5
4.2
Rim/7
24.6

Kickback and guide bar nose radius

For sprocket nose bars the nose radius is specified by
the number of teeth, such as 10T. For solid guide bars
the nose radius is specified by the dimension of the
nose radius. For a given guide bar length, you can use a
guide bar with smaller nose radius than given.
Note: The usable cutting length is usually 1 in less than
the nominal guide bar length.
Saw chain
Type
Zenoah H30
saw chain need to be Pixel to get these benefits. Pixel
cutting equipment is marked with this symbol.
Length, drive Low Kick-
links (no.) back
64 Yes
35