Fermax 2578 Manual De Instrucciones página 36

Example: When programming ring pattern, number pressed is time elapsed between 2 consecutives
rings of the house phone. Then, when pressing number 2 on outdoor pannel the ring pattern is 2
seconds. The maximum ring pattern is 10 seconds which matches number 10.
programación Programming
Relay activation time
tiempo activación relé
Ring Pattern
cadencia timbre
Default values are 2.5 seconds for relay activation time and 1 second for ring pattern.
If no call is received from the outdoor panel after 1 minute system exits programming mode.
√ √ √ √ √
Note about programming with ADS City Outdoor Pannels
When ADS City Pannels with push buttons are installed, it will be necesary disconnect
the push buttons modules and connect a numeric keyboard to programme the parameters.
√ √ √ √ √
Note about programming with MDS Outdoor Pannels
If the installation has more than 199 apartments you are using an MDS outdoor pannel
and MDS-ADS decoders. When programming parameters it is important to know the
range of the decoder which the Central unit is hanging.
36
Tel. ner. nº tel tiempo Time
n 0.5 x n seg
n 1 x n seg
nº tel. máx tiempo máx. Time Max. Time
60 30 seg
10 10 seg
defecto Default
2.5 seg
1 seg