Start Washer; Special Function Buttons; End Of Wash Cycle - Primus F/FS22 Manual De Uso

 Standard wash programs versus custom made wash programs.
This explanation is only valid for standard wash programs. For custom made programs, it is possible that
other dispensers have been selected.(See programming manual).
:
 Remark It is advisable to use only detergents with "foam breaker" which can easily be found in retail
shops. The dosage of soap to use is generally mentioned on the packing. An overdose of detergent can
lead to poor wash results and "suds overflow which can damage the machine.
Take care that the lid of the soap dispenser is closed if the machine starts.

4.2.3.START WASHER

SELECT PROCESS
After selecting the wished wash program number, by pressing the START button the wash cycle will
bestarted. If there is no washing program available for the selected program number, INVALID will
bedisplayed. Once the program has been started, the Name of the Selected wash program will be displayed
for a few seconds.
PrXX StYY ZZ.Z Min
Sequence
XX : The program number
YY : The program step number
ZZ.Z : The remaining program time in 1/10 of Minutes or 1/10 of Hours.
Sequence : The executed Sequence.
: A row of bars shows the remaining sequence time
Attention !!!
The program can only be started when the key switch is in Run Mode.

4.2.4.SPECIAL FUNCTION BUTTONS

INFO : - Gives an overview of the available wash programs
-Gives an overview of the wash sequence functions of a particular Selected Program.
SERVICE - STATE :
INLETS 1, 2, 3 (4, 5, 6) - Opens inlets 1, 2, 3(4, 5, 6)
DRAIN
HEATING
SPEED ADJUST

4.2.5.END OF WASH CYCLE

At the end of the wash cycle, when the remaining program time reaches 0, PROGRAM END
is displayed. When UNLOAD appears on the display, open the door by the door handle and take out
the garments of the washer/extractor.
When the power supply has been cut, the door will be automatically blocked against opening.After
cooling down the washing bath, the door can be opened according to the machine maintenance
instructions.

Delay time _ _ : _ _
Insert first the Program number.
Press the DOT button to select the delay time function.
On the first 2 positions : insert the value for Hours. On the last 2 positions : insert the value for
minutes.
Example 12:3512 hours35 minutes
10
X X
- Shows the actual water Temperature and Level.
- Shows the number of fulfilled cycles.
- Shows the actual states of the machine.
- Opens the drain valve
- Switches On the Heating
- Changes the drum speed
USER´S MANUAL
00:05 5 minutes
PUB DATE: 05/00 507 329