Machines With Microprocessor Fc (Full Control); Program Selections; Add Detergents - Primus F/FS22 Manual De Uso

4.2. MACHINES WITH MICROPROCESSOR FC (FULL CONTROL)

START (advancing program)
STOP (interrupting program)
YES SELECTION
NO SELECTION
INCREASING SEQUENCE TIME
DECREASING SEQUENCE TIME
PREVIOUS MENU ITEM
NEXT MENU ITEM

4.2.1.PROGRAM SELECTIONS

SELECT PROCESS _ _
Choose one of the available wash programs, best corresponding to the quality of the garments and allowed
wash temperature in the wash load.Insert the wash Program number. The different washing programs are
indicated on the operator panel. The selection of the program determines the temperature and the time for
washing and rinsing, the wash action and the spin speed and time. If you wish, you can adapt the wash
programs.(See programming manual).

4.2.2.ADD DETERGENTS

 For Washer extractors with top soap dispenser.

Fill the soap dispenser on the top of the washer extractor depending of the chosen program.
 Dispenser A :
 Dispenser B :
cycle, you may add liquid detergent or liquid bleach during the wash cycle. If added at the
start of the cycle, it will run in the washer prematurely)
 Dispenser C :
final rinse)
 For Washing machines with front soap dispenser.

Fill the soap dispenser at the front of the washer extracter depending of the chosen program.
 Dispenser A :
 Dispenser B :
 Dispenser D :
Add the detergents before the start of the wash cycle.You can always interrupt the program by opening the
Soap Dispenser Door to add once more detergent at the same dispenser.
507 329 PUB DATE: 05/00
Prewash (add the detergent at the beginning of the wash cycle)
Wash (add powder detergent or bleach detergent at the beginning of the
Final Rinse (Add fabric softener at the beginning of the cycle or before the
1 st Wash
2 nd Wash
Last Rinse
USER´S MANUAL
INFO (overview available wash programs
and wash sequence functions)
SERVICE (shows actual water temperature and
level, number of fullfilled cycles and actual states)
ACTIVATES THE TIME DELAY FUNCTION
(delay time will be started by pressing start)
OPENING THE INLET VALVES
ACTIVATE HEATING
OPEN DRAIN VALVE
SPEED ADJUST
ENTER - SELECTION OR CONFIRMATION
9