Before Testing; Checking The Code Number (For Β-Ketone); Control Solution Testing - Fora GTel Manual Del Propietário

BEFORE TESTING

Checking the Code Number (for β-ketone)
NOTICE:
The code number on the display is only for your reference, it may not be actual
code for this meter.
WARNING:
 It is important to make sure that the LCD displayed code is the same as the
code on the test strip vial before testing. Failure to do so will get inaccurate
results.
 If the LCD displayed code is not the same as the code on the test strip vial, and
the code number cannot be updated, please contact Customer Service for
assistance.

Control Solution Testing

Our control solutions contain a known amount of glucose and β-ketone
that reacts with test strips and is used to ensure your meter and test
strips are working together correctly.
Do a control solution test when:
 you first receive the meter,
 at least once a week to routinely check the meter and test strips,
 you begin using a new vial of test strips,
 you suspect the meter or test strips are not working properly,
You need to make sure that the code
number displayed on the meter
matches the number on the test strip
vial before you proceed. If it matches,
you can proceed with your test. If the
codes do not match, please stop testing
and contact Customer Service for help.
13