Safety Regulations; Correct Use; Liability Information - MSA Gallet F1 XF Manual De Instrucciones

1

Safety Regulations

1.1

Correct Use

The following communication accessories are described in this document:
• Flexible microphone headset
• Bone conductive headset
• Push to talk module
These communication accessories are designed to be used together with the
Gallet F1 XF / Cairns XF1 fire-fighting helmet.
WARNING!
These accessories should not be used with other types of helmets or without a helmet.
The accessories provide hand-free communication capability in situations where the Gallet F1 XF /
Cairns XF1 helmet is likely to be used. These situations include but are not limited to structural fire-
fighting, rescue operations, road traffic accidents.
WARNING!
Uses in explosive atmosphere require the use of ATEX approved equipment.
Selected configurations of the Gallet F1 XF / Cairns XF1 communication accessories are ATEX certi-
fied for use with ATEX certified radios.
Before using the product in an ATEX area, it is the responsibility of the user to correctly verify the ATEX
compatibility of the interconnected systems, particularly between the radio and the MSA PTT (push to
talk). Refer if necessary to the ATEX certificate of the products concerned.MSA disclaims any liability
for the improper use.
Be aware that other configurations are not ATEX certified and must not be used in explosive areas.
To know if a configuration is ATEX certified or not, refer to the table colors code reference
(see chapter 3.4 "Push To Talk Module").
It is imperative that this operating manual be read and observed when using the product. In particular,
the safety instructions, as well as the information for the use and operation of the product, must be
carefully read and observed. Furthermore, the national regulations applicable in the user's country
must be taken into account for safe use.
Alternative use, or use outside this specification will be considered as non-compliance. This also
applies especially to unauthorized alterations to the product and to commissioning work that has not
been carried out by MSA or authorized persons.
1.2

Liability Information

MSA accepts no liability in cases where the product has been used inappropriately or not as intended.
The selection and use of the product are the exclusive responsibility of the individual operator.
Product liability claims, warranties also as guarantees made by MSA with respect to the product are
voided, if it is not used, serviced or maintained in accordance with the instructions in this manual.
DANGER!
This product is supporting life and health. Inappropriate use, maintenance or servicing may affect the
function of the device and thereby seriously compromise the user's life.
Before use the product operability must be verified. The product must not be used if the function test
is unsuccessful, it is damaged, a competent servicing/maintenance has not been made, genuine MSA
spare parts have not been used.
®
Gallet F1 XF / Cairns XF1
Safety Regulations
GB
3