Assembly Procedure For Seals - Campbell Hausfeld CHN101 Manual Del Usuario

Operating Instructions
User-Maintenance Instructions (Continued)

ASSEMBLY PROCEDURE FOR SEALS

When repairing a tool, the internal
parts must be cleaned and lubricated.
Parker O-lube or equivalent must be
used on all o-rings. Each o-ring must be
coated with O-lube before assembling.
Fasteners
The following Campbell Hausfeld finishing fasteners are available at local retail stores. If you need help locating any item, call
customer service at 1-800-543-6400. Campbell Hausfeld fasteners meet or exceed ASTM Standard F1667.
Model # Length
FB180016 5/8 inch
FB180025 1 inch
FB180030 1-1/4 inch
Interchange Information
Can use brad nails from the following branded air-powered brad nailers: Bostitch
DeWalt ® D51238K, Paslode
www.chpower.com
A small amount of oil must be used on all moving surfaces and pivots. After
reassembling, a few drops of 30W
non-detergent oil or equivalent, must
be added through the air line before
testing.
Shank
Gauge Finish
18 Gauge Galvanized/Vinyl Coated
18 Gauge Galvanized/Vinyl Coated
18 Gauge Galvanized/Vinyl Coated
® T125-F18, Porter Cable ® BN125, and Senco Finish Pro
STORAGE
The stapler should be stored in a cool
dry place.
Head
Brad/Brown
Brad/Brown
Brad/Brown
® BT125SK-2, Campbell Hausfeld
® 15.
6
Nails
Collation Per Stick
Adhesive 100
Adhesive 100
Adhesive 100
® NB0030,
Nails
Per Box
1000
1000
1000