Campbell Hausfeld CHN20102 Manual De Instrucciones De Operación
Campbell Hausfeld CHN20102 Manual De Instrucciones De Operación

Campbell Hausfeld CHN20102 Manual De Instrucciones De Operación

Clavadora para acabado
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

See Warranty on page 8 for important information about commercial use of this product.
Operating Instructions
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Table of Contents
Description . . . . . . . . . . . . . . . . . . . . . 1
Unpacking . . . . . . . . . . . . . . . . . . . . . . 1
Safety Guidelines . . . . . . . . . . . . . . . . 1
Specifications. . . . . . . . . . . . . . . . . . . . 2
Operating Instructions . . . . . . . . . . . . 4
Lubrication . . . . . . . . . . . . . . . . . . . . 4
Recommended Hookup. . . . . . . . . . 4
Operational Mode . . . . . . . . . . . . . . 5
of the Exhaust . . . . . . . . . . . . . . . . . 5
Technical Service . . . . . . . . . . . . . . . 6
Tool Repair . . . . . . . . . . . . . . . . . . . . 6
Troubleshooting Chart . . . . . . . . . . . . 7
Warranty . . . . . . . . . . . . . . . . . . . . . . . 8

Description

This nailer is designed for decorative
trim, molding, window casings,
furniture trim and picture frame
assembly. Features include: convenient
rear loading magazine which holds
up to 100 nails, no-mar tip, adjustable
exhaust, single cycle trigger, quick clear
nose, and an adjustable depth of drive
mechanism.
Campbell Hausfeld Nailers meet or exceed Industries' Standards as set forth by the American
National Standard Institute/International Staple, Nail and Tool Association in ANSI/ISANTA
SNT-101-2002.
© 2009 Campbell Hausfeld/Scott Fetzer

Unpacking

After unpacking the unit, inspect
carefully for any damage that may
have occurred during transit. Make sure
to tighten fittings, bolts, etc., before
putting unit into service.

Safety Guidelines

This manual contains information
that is very important to know and
understand. This information is
provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS. To help
recognize this information, observe the
following symbols.
hazardous situation which, if not
avoided, WILL result in death or serious
injury.
hazardous situation which, if not
avoided, COULD result in death or
serious injury.
hazardous situation which, if not
avoided, MAY result in minor or
moderate injury.
information, that if not followed, may
cause damage to equipment.
NOTE: Information that requires special
attention.
Important Safety Instructions
INSTRUCTIONS PERTAINING TO A
RISK OF FIRE, ELECTRIC SHOCK, OR
INJURY TO PERSONS
REMINDER: Keep your dated proof of purchase for warranty purposes!
Attach it to this manual or file it for safekeeping.
For parts, product & service information
visit www.chpower.com
Finishing Nailer
Model CHN20102
Danger indicates
an imminently
Warning indicates
a potentially
Caution indicates
a potentially
should always be followed, including
the following:
CALIFORNIA PROPOSITION 65
Notice indicates
important
contain chemicals known to the State
of California to cause cancer and birth
defects or other reproductive harm.
Wash hands after handling.
You can create dust when
you cut, sand, drill or grind
materials such as wood,
paint, metal, concrete, cement, or other
masonry. This dust often contains
chemicals known to cause cancer, birth
defects, or other reproductive harm.
Wear protective gear.
CHN20102
Locate model and date code on
tool and record below:
Model No.: _____________________
Date Code: _____________________
Retain these numbers for
future reference.
When using tools,
basic precautions
This product or
its power cord may
IN703201AV 8/09
Tabla de contenido
loading

Resumen de contenidos para Campbell Hausfeld CHN20102

  • Página 17: Desempaque

    RECORDATORIO: ¡Guarde su comprobante de compra con fecha para fines de la garantía! Adjúntela a este manual o archívela en lugar seguro. Las clavadoras de Campbell Hausfeld cumplen o exceden los estándares de la Industria IN703201AV 8/09 establecidos en los códigos SNT-101-2002 de las organizaciones norteamericanas ANSI/ISANTA.
  • Página 18: Componentes Y Especificaciones De La Herramienta

    CHN20102 Manual de Instrucciones de Operación Instrucciones de Seguridad c. Mantenga alejados a los permiten un mejor control de observadores, niños y visitantes la herramienta en situaciones Importantes (Cont.) mientras hace funcionar la inesperadas. GENERAL herramienta. Las distracciones e. Use equipo de seguridad. Se debe a.
  • Página 19: Uso Y Cuidado De La Herramienta

    CHN20102 Manual de Instrucciones de Operación Instrucciones de Seguridad no identificados por el fabricante de la herramienta para uso con Importantes (Cont.) Nunca ponga las manos ni esta herramienta pueden provocar Siempre colóquese ninguna otra parte del cuerpo riesgos de lesiones personales o en una posición...
  • Página 20: Suministro De Aire

    CHN20102 Manual de Instrucciones de Operación b. No use nunca oxígeno, dióxido 1. Desconecte la Instrucciones de seguridad de carbono, gases combustibles importantes (Continúa) herramienta de la o ningún gas en botellas como fuente de SERVICIO suministro de aire para la suministro de aire a.
  • Página 21: Modeo De Operación

    CHN20102 Manual de Instrucciones de Operación 1. Desconecte la PARA CARGAR Y DESCARGAR Instrucciones de clavadora de LA HERRAMIENTA Funcionamiento (Cont.) la fuente de 1. Siempre desconecte la herramienta 3. Use siempre mangueras de suministro de aire. del suministro de aire antes de suministro de aire con una presión...
  • Página 22: Para Ajustar La Direccion Del Tubo De Escape

    El alambre Clavos de seguro se Estos clavos para acabado de Campbell Hausfeld los puede comprar en su tienda destrabará de los más cercana. Si necesita ayuda para encontrar un artículo, comuníquese al ganchos de la punta.
  • Página 23: Guía De Diagnóstico De Averías

    CHN20102 Manual de Instrucciones de Operación Guía de Diagnóstico de Averías Deje de usar la grapadora inmediatamente si alguno de los si guientes problemas ocurre. Podría ocasionarle heridas graves. Cualquier reparación o reemplazo de piezas los debe hacer un técnico califi...
  • Página 24: Garantía Limitada

    8. RESPONSABILIDADES DEL COMPRADOR BAJO ESTA GARANTIA: A. Suministrar prueba fechada de compra y la historia de mantenimiento del producto. B. Llame a Campbell Hausfeld (800) 543-6400 por sus opciones de servicio incluidas en la garantía. Los costos de flete correrán por cuenta del comprador.

Tabla de contenido