Campbell Hausfeld CHN20103 Instrucciones De Operación

Campbell Hausfeld CHN20103 Instrucciones De Operación

Ocultar thumbs Ver también para CHN20103:
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

See Warranty on page 8 for important information about commercial use of this product.
Operating Instructions
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Table of Contents
Description . . . . . . . . . . . . . . . . . . . . . 1
Unpacking . . . . . . . . . . . . . . . . . . . . . . 1
Safety Guidelines . . . . . . . . . . . . . . . . 1
Specifications. . . . . . . . . . . . . . . . . . . . 2
Operating Instructions . . . . . . . . . . . . 4
Lubrication . . . . . . . . . . . . . . . . . . . . 4
Recommended Hookup. . . . . . . . . . 4
Operational Mode . . . . . . . . . . . . . . 5
of the Exhaust . . . . . . . . . . . . . . . . . 5
Technical Service . . . . . . . . . . . . . . . 6
Tool Repair . . . . . . . . . . . . . . . . . . . . 6
Troubleshooting Chart . . . . . . . . . . . . 7
Warranty . . . . . . . . . . . . . . . . . . . . . . . 8

Description

This nailer is designed for decorative
trim, molding, window casings,
furniture trim and picture frame
assembly. Features include: convenient
rear loading magazine which holds
up to 100 nails, no-mar tip, adjustable
exhaust, single cycle trigger, quick clear
nose, and an adjustable depth of drive
mechanism.
Campbell Hausfeld Nailers meet or exceed Industries' Standards as set forth by the American
National Standard Institute/International Staple, Nail and Tool Association in ANSI/ISANTA
SNT-101-2002.
© 2010 Campbell Hausfeld/Scott Fetzer

Unpacking

After unpacking the unit, inspect
carefully for any damage that may
have occurred during transit. Make sure
to tighten fittings, bolts, etc., before
putting unit into service.

Safety Guidelines

This manual contains information
that is very important to know and
understand. This information is
provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS. To help
recognize this information, observe the
following symbols.
hazardous situation which, if not
avoided, WILL result in death or serious
injury.
hazardous situation which, if not
avoided, COULD result in death or
serious injury.
hazardous situation which, if not
avoided, MAY result in minor or
moderate injury.
information, that if not followed, may
cause damage to equipment.
NOTE: Information that requires special
attention.
Important Safety Instructions
INSTRUCTIONS PERTAINING TO A
RISK OF FIRE, ELECTRIC SHOCK, OR
INJURY TO PERSONS
REMINDER: Keep your dated proof of purchase for warranty purposes!
Attach it to this manual or file it for safekeeping.
For parts, product & service information
visit www.chpower.com
Finishing Nailer
Model CHN20103
Danger indicates
an imminently
Locate model and date code on
tool and record below:
Model No.: _____________________
Date Code: _____________________
Warning indicates
a potentially
Caution indicates
a potentially
should always be followed, including
the following:
CALIFORNIA PROPOSITION 65
Notice indicates
important
contain chemicals known to the State
of California to cause cancer and birth
defects or other reproductive harm.
Wash hands after handling.
You can create dust when
you cut, sand, drill or grind
materials such as wood,
paint, metal, concrete, cement, or other
masonry. This dust often contains
chemicals known to cause cancer, birth
defects, or other reproductive harm.
Wear protective gear.
CHN20103
Retain these numbers for
future reference.
When using tools,
basic precautions
This product or
its power cord may
IN732500AV 1/10
Tabla de contenido
loading

Resumen de contenidos para Campbell Hausfeld CHN20103

  • Página 17: Descripción

    RECORDATORIO: ¡Guarde su comprobante de compra con fecha para fines de la garantía! Adjúntela a este manual o archívela en lugar seguro. Las clavadoras de Campbell Hausfeld cumplen o exceden los estándares de la Industria IN732500AV 1/10 establecidos en los códigos SNT-101-2002 de las organizaciones norteamericanas ANSI/ISANTA.
  • Página 18: Componentes Y Especificaciones De La Herramienta

    Campbell Hausfeld si tiene alguna La exposición prolongada Un momento de desatención pregunta. a ruido de alta intensidad mientras hace funcionar la puede causar pérdida de...
  • Página 19 CHN20103 Manual de Instrucciones de Operación Instrucciones de Seguridad no identificados por el fabricante de la herramienta para uso con Importantes (Cont.) Nunca ponga las manos ni esta herramienta pueden provocar Siempre colóquese ninguna otra parte del cuerpo riesgos de lesiones personales o en una posición...
  • Página 20: Instrucciones De Funcionamiento

    CHN20103 Manual de Instrucciones de Operación Instrucciones de seguridad b. No use nunca oxígeno, dióxido 1. Desconecte la de carbono, gases combustibles importantes (Continúa) herramienta de la o ningún gas en botellas como fuente de SERvICIO suministro de aire para la suministro de aire a.
  • Página 21: Modeo De Operación

    CHN20103 Manual de Instrucciones de Operación Instrucciones de PARA CARGAR Y DESCARGAR 1. Desconecte la clavadora de LA HERRAMIENTA Funcionamiento (Cont.) la fuente de 1. Siempre desconecte la herramienta 3. Use siempre mangueras de suministro de aire. del suministro de aire antes de suministro de aire con una presión...
  • Página 22: Para Ajustar La Direccion Del Tubo De Escape

    El alambre Clavos de seguro se Estos clavos para acabado de Campbell Hausfeld los puede comprar en su tienda destrabará de los más cercana. Si necesita ayuda para encontrar un artículo, comuníquese al ganchos de la punta.
  • Página 23: Guía De Diagnóstico De Averías

    CHN20103 Manual de Instrucciones de Operación Guía de Diagnóstico de Averías Deje de usar la grapadora inmediatamente si alguno de los si guientes problemas ocurre. Podría ocasionarle heridas graves. Cualquier reparación o reemplazo de piezas los debe hacer un técnico calificado personal de un centro autorizado de servicio.
  • Página 24: Garantía Limitada

    8. RESPONSABILIDADES DEL COMPRADOR BAJO ESTA GARANTIA: A. Suministrar prueba fechada de compra y la historia de mantenimiento del producto. B. Llame a Campbell Hausfeld (800) 543-6400 por sus opciones de servicio incluidas en la garantía. Los costos de flete correrán por cuenta del comprador.

Tabla de contenido