Assembly Procedure For Seals - Campbell Hausfeld NB0064 Manual De Instrucciones

Operating Instructions
Assembly Procedure For
Seals
When repairing a nailer, the internal
parts must be cleaned and lubricated.
Parker O-lube or equivalent must be
used on all o-rings. Each o-ring must be
coated with O-lube before assembling.
A small amount of oil must be used on
all moving surfaces and pivots. After
reassembling, a few drops of 30W non-
detergent oil or equivalent, must be
added through the air line before
testing.
Fasteners
The following Campbell Hausfeld finishing nails are available at local retail stores. If you need help locating any item,
call customer service at 1-800-543-6400. Campbell Hausfeld nails meet or exceed ASTM Standard F1667.
Model # Length
FB003060 1-1/4"
FB004060 1-1/2"
FB004560 1-3/4"
FB005060 2"
FB006560 2-1/2"
Interchange Information
Nails used in the Campbell Hausfeld NB0064 Finishing Nailer will also work in Hitachi NT65A, Paslode 3250-F16, IM250F,
Duo Fast LFN-764, Sears 18321, Porter Cable FN200 and FN250.
www.chpower.com
Shank
Finish
Gauge
16 Gauge Galvanized
16 Gauge Galvanized
16 Gauge Galvanized
16 Gauge Galvanized
16 Gauge Galvanized
Head Collation
Brad Adhesive
Brad Adhesive
Brad Adhesive
Brad Adhesive
Brad Adhesive
6
Model NB0064
Nails Per Nails Per
Stick Box
50 2500
50 2500
50 2500
50 2500
50 2500