Tabla de contenido
0
0
A
Using the machine
Handwheel
The handwheel turns
counterclockwise.
Two step presser foot lifter
To raise the presser foot, raise the lever
on the rear of the machine until it engages.
The presser foot can be raised again to
maximum height to provide more space
between presser foot and stitch plate.
Changing the presser foot
- Switch the machine off " O ".
- Raise the presser foot.
Press the catch (A) to release the presser
foot from the clamp.
Raise the presser foot lifter to the highest
position and remove the presser foot sole
to the left.
To attach the presser foot sole, place it under
the shaft. The groove in the shaft should line
up exactly with the presser foot pin.
Lower the shank and the presser foot will
engage automatically.
13
Tabla de contenido
