Garmin GPSMAP 600 Serie Instrucciones De Instalatión página 7

Connecting the Power/Data Cable to a NMEA 0183 Device (Optional)
You can connect the GPSMAP 600 series flush-mount bracket to NMEA 0183-compatible electronic equipment, such as a VHF radio, using
the power/data cable. The GPSMAP 600 series device has two NMEA 0183 ports, and it can communicate with two NMEA 0183-compatible
devices. Refer to the wiring diagram for connecting the power/data cable to NMEA 0183-compatible devices.
Notes:
• When wiring NMEA 0183 devices for two-way communication, use the corresponding TX and RX wires for each port. For example, if you
use the port 1 TX wire (yellow), you must also use the port 1 RX wire (blue). Likewise, if you use the port 2 TX wire (brown), you must
also use the port 2 RX wire (white).
•
If the NMEA 0183 device you are wiring only transmits or only receives (one-way communication), connect the appropriate RX or TX wire
from the marine-mount bracket, and leave the other wire on the port unconnected.
• Refer to the manufacturer's instructions for your NMEA 0183 device for wire identification and configuration information.
• If it is necessary to extend NMEA 0183 wires, use 28 AWG wire.
GPSMAP 600 SERIES
MARINE-MOuNT bRACKET
Wiring the GPSMAP 600 Series Flush-Mount bracket to a NMEA 0183-compatible Device
Connecting the Power/Data cable to an External Audio Device (Optional)
Connect an external audio device using the wires on the mount-bracket cable. Refer to the table for wire colors. If it is necessary to extend the
audio-signal wires, use 28 AWG wire.
GPSMAP 600 Series Flush Mount Kit Installation Instructions
+
bATTERy
11–32 vDC
WIRE
COLOR
FuSE
2.5 A
RED (POWER)
bLACK (GROuND)
yELLOW (PORT 1 TX)
OR
bROWN (PORT 2 TX)
>
bLuE (PORT 1 RX)
OR
WHITE (PORT 2 RX)
>
Wire Function
Audio left
Audio right
Audio ground
Audio Wire Connections
-
WIRE
RED (POWER)
bLACK (GROuND)
NMEA 0183 RX
>
NMEA 0183 TX
>
Color
Violet
Orange
Green
NMEA 0183-COMPATIbLE
DEvICE
5