Fluorescence Observation Procedures (Im-3F / Im-3Fl4); Fluorescence Observation Procedures (Im-3Ld) - Optika Italy IM-3 Serie Manual De Instrucciones

10. Fluorescence observation procedures (IM-3F / IM-3FL4)

Set the power supply switch to "I" (ON) and
wait for the arc to stabilize (5 or 10 minutes).
Place a specimen on the stage.
Insert in the light path the filtercube
suitable for the specimen
Insert the objective into the light path
and focus the specimen.
Adjust until you obtain a bright and even field of view
Insert the shutter when the microscope is

11. Fluorescence observation procedures (IM-3LD)

Set the main swith to "II" (ON) and adjust light intensity.
Place a specimen on the stage.
Insert in the light path the filtercube
suitable for the specimen
Insert the objective into the light path
and focus the specimen.
Insert the anti-glow cap to reduce flares
not used for a short time
Begin observation
Begin observation
(Used commands)
Fluorescence power supply
Stage
Fluorescence filter slider
Nosepiece
Coarse and fine focus knobs
Lamp housing focussing and
centering screws
Filter holder / shutter
(Used commands)
Main switch
Brightness adjustment knob
Stage
Fluorescence filter slider
Nosepiece
Coarse and fine focus knobs
Anti-glow cap
Page 22
(Chapter)
(12)
(5)
(12)
(5)
(5)
(12)
(12)
(Chapter)
(9)
(9)
(5)
(12)
(5)
(5)
(12)