Flex ALR 512 Instrucciones De Funcionamiento página 17

Rotational laser
10 On/Off button
Switches the ALR on and off
11 Operating status LED
Lit = power tool ready to use
Flashing = charge battery, power tool
no longer functions with rotating laser
beam
12 Vertical spirit level
Levels the power tool for vertical
application
13 Tilt function LED
indicates the activated tilt function
14 Tilt function button
switches the tilt function on and off
15 Button for activating self-levelling
16 Shift button
a) for changing the operating mode
b) for changing the speed of rotation
17 X/Y axis LED
Indicates the activated swivel axis for
slope function
18 Button for right inclination
of the activated axis during slope
function
19 Slope function button
switches the slope function on and off
20 Button for left inclination
of the activated axis during slope
function
21 Button for adjusting the beam in
a clockwise direction in scan mode
22 Mode button for selecting operating
modes in scan mode
23 LED for the axis to be calibrated
24 Button for adjusting the beam in
an anti-clockwise direction in scan
mode
25 Enter button *
acknowledges changes made during
calibration
26 Buttons for changing the beam
position during calibration *
27 Button for switching over X/Y axis *
during calibration
* Buttons are accessible only when the remote control
cover is slid open.
Calibration by authorised technicians only!
17